Код: Выделить всё
* Name : 731
Secret : <Set>
MD5Secret : <Not set>
Context : from-internal
Subscr.Cont. : <Not set>
Language : ru
AMA flags : Unknown
Transfer mode: open
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup :
Mailbox : 731@device
VM Extension : *97
LastMsgsSent : 0/6
[b] Call limit : 1[/b]
Dynamic : Yes
Callerid : "device" <731>
MaxCallBR : 384 kbps
Expire : 2478
Insecure : no
Nat : Always
ACL : Yes
T38 pt UDPTL : No
CanReinvite : No
PromiscRedir : No
User=Phone : No
Video Support: Yes
Trust RPID : No
Send RPID : No
Subscriptions: Yes
Overlap dial : Yes
DTMFmode : rfc2833
LastMsg : 0
ToHost :
Addr->IP : 10.10.20.39 Port 5061
Defaddr->IP : 0.0.0.0 Port 5060
Def. Username: 731
SIP Options : (none)
Codecs : 0x28000c (ulaw|alaw|h263|h264)
Codec Order : (ulaw:20,alaw:20)
Auto-Framing: No
Status : OK (111 ms)
Useragent : Cisco-CP7940G/8.0
Reg. Contact : sip:731@10.10.20.39:5061;transport=udp... и файл sip_additional.conf не изменился.Cvieri писал(а):Делал и ампортал рестарт и даже ребутал комп
а это происходит при нажатии на Большую Оранжевую Кнопку "Apply Configuration Changes"sip_additional.conf очищается при перезагрузке конфигурации freepbx
Код: Выделить всё
;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;
[102]
deny=0.0.0.0/0.0.0.0
type=friend
secret=ХХХХХ
qualify=yes
port=5060
pickupgroup=
permit=0.0.0.0/0.0.0.0
nat=yes
mailbox=102@device
host=dynamic
dtmfmode=rfc2833
dial=SIP/102
context=from-internal
canreinvite=no
callgroup=
callerid=device <102>
accountcode=
call-limit=1Код: Выделить всё
;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;
[102]
deny=0.0.0.0/0.0.0.0
type=friend
secret=ХХХ
qualify=yes
port=5060
pickupgroup=
permit=0.0.0.0/0.0.0.0
nat=yes
mailbox=102@device
host=dynamic
dtmfmode=rfc2833
dial=SIP/102
context=from-restricted
canreinvite=no
callgroup=
callerid=device <102>
accountcode=
call-limit=1