Страница 1 из 2
Не работает BLF на Cisco CP-9971 и Cisco CP-7975G
Добавлено: 25 янв 2014, 23:33
Sansey
Суть проблемы с следующем. Не работают BLF. При этом функция прекрасно работает на телефонах серии 504 и 525. Настройки в конфиге телефона для кнопки выглядят следующим образом:
Код: Выделить всё
<line button="2">
<featureID>21</featureID>
<featureLabel>Description</featureLabel>
<speedDialNumber>Directory Number</speedDialNumber>
</line>
Вывод команды...
...показывает что номер подписан на получение статуса другого номера.
Подскажите куда копать?
Версии: Asterisk 11.7, Elastix 2.4.0, FreePBX 2.11.0.
Re: Не работает BLF на Cisco CP-9971 и Cisco CP-7975G
Добавлено: 25 янв 2014, 23:51
ded
Тут у Вас вот прямо буквами прописано?
<speedDialNumber>Directory Number</speedDialNumber>
должно быть типа
<featureLabel>Ivan Petrov</featureLabel>
<speedDialNumber>123</speedDialNumber>
А покажите и вывод
sip show subscriptions
Re: Не работает BLF на Cisco CP-9971 и Cisco CP-7975G
Добавлено: 26 янв 2014, 01:09
Sansey
Нет конечно.
Код: Выделить всё
<line button="3">
<featureID>21</featureID>
<featureLabel>Иван Петров</featureLabel>
<speedDialNumber>3111</speedDialNumber>
<featureOptionMask>1</featureOptionMask>
</line>
Вывод
Код: Выделить всё
Peer User Call ID Extension Last state Type Mailbox Expiry
192.168.0.213 3000 2afcc96b-47bf8d 3118@from-inter Idle dialog-info+xml <none> 001800
10.5.7.21 3271 53b4a7cf-1b9fdf 3145@from-inter Idle dialog-info+xml <none> 001800
10.5.7.21 3271 78658943-38fd4d 3177@from-inter Idle dialog-info+xml <none> 001800
192.168.0.213 3000 3a796887-189819 3424@from-inter Idle dialog-info+xml <none> 001800
192.168.1.48 3521 ZmE2M2VmNTk1NGU 3929@from-inter Unavailable pidf+xml <none> 003600
192.168.1.48 3521 YWQ5NDU0ZTIwMzJ 3000@from-inter Idle pidf+xml <none> 003600
192.168.1.48 3521 NWFjYTFjMGQwMzF 3271@from-inter Idle pidf+xml <none> 003600
7 active SIP subscriptions
То есть номер 3118 должен слушать 3111. Но я уже вижу что по выводу такого не происходит, наверное отвалилось что то за выходные.
Re: Не работает BLF на Cisco CP-9971 и Cisco CP-7975G
Добавлено: 26 янв 2014, 03:07
ded
Вот-вот.
И команду
core show hints
тоже используйте.
Re: Не работает BLF на Cisco CP-9971 и Cisco CP-7975G
Добавлено: 27 янв 2014, 10:20
Sansey
Перенастроил новый номер на телефоне, теперь 3003 должен слушать 3000. Кнопка не работает.
Код: Выделить всё
Peer User Call ID Extension Last state Type Mailbox Expiry
192.168.0.17 3003 dca5f486-5cea00 3000@from-inter Idle cpim-pidf+xml <none> 003600
Код: Выделить всё
3000@ext-local : SIP/3000 State:Idle Watchers 3
1 hint matching extension 3000
Re: Не работает BLF на Cisco CP-9971 и Cisco CP-7975G
Добавлено: 27 янв 2014, 18:55
Sansey
Конфиг от 9971
Код: Выделить всё
<?xml version="1.0" encoding="UTF-8"?>
<device>
<deviceProtocol>SIP</deviceProtocol>
<sshUserId>admin</sshUserId>
<sshPassword>cisco</sshPassword>
<devicePool>
<dateTimeSetting>
<dateTemplate>D.M.Y</dateTemplate>
<timeTemplate>HH:MM</timeTemplate>
<timeZone>Caucasus Standard/Daylight Time</timeZone>
<ntps>
<ntp>
<name>10.4.2.100</name>
<ntpMode>Unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
</ports>
<processNodeName>10.4.2.100</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<commonProfile>
<phonePassword></phonePassword>
<backgroundImageAccess>true</backgroundImageAccess>
<callLogBlfEnabled>3</callLogBlfEnabled>
</commonProfile>
<loadInformation>sip9971.9-4-1-9</loadInformation>
<featurePolicyFile>DefaultFP.xml</featurePolicyFile>
<vendorConfig>
<disableSpeaker>false</disableSpeaker>
<disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
<pcPort>0</pcPort>
<settingsAccess>1</settingsAccess>
<garp>0</garp>
<voiceVlanAccess>0</voiceVlanAccess>
<ciscoCamera>1</ciscoCamera>
<videoCapability>1</videoCapability>
<usbClasses>0,1,2</usbClasses>
<sdio>1</sdio>
<wifi>0</wifi>
<bluetoothProfile>0,1</bluetoothProfile>
<powerNegotiation>0</powerNegotiation>
<autoSelectLineEnable>0</autoSelectLineEnable>
<webAccess>0</webAccess>
<sshAccess>0</sshAccess>
<g722CodecSupport></g722CodecSupport>
<daysDisplayNotActive>1,2,3,4,5,6,7</daysDisplayNotActive>
<displayOnTime>08:30</displayOnTime>
<displayOnDuration>09:30</displayOnDuration>
<displayIdleTimeout>01:00</displayIdleTimeout>
<displayOnWhenIncomingCall>1</displayOnWhenIncomingCall>
<spanToPCPort>1</spanToPCPort>
<loggingDisplay>1</loggingDisplay>
<loadServer></loadServer>
</vendorConfig>
<commonConfig>
<usb1>1</usb1>
<usb2>1</usb2>
<ciscoCamera>1</ciscoCamera>
<usbClasses>0,1,2</usbClasses>
<sdio>1</sdio>
<bluetooth>1</bluetooth>
<wifi>1</wifi>
<bluetoothProfile>0,1</bluetoothProfile>
<joinAndDirectTransferPolicy>0</joinAndDirectTransferPolicy>
</commonConfig>
<enterpriseConfig>
<usb1>1</usb1>
<usb2>1</usb2>
<ciscoCamera>1</ciscoCamera>
<usbClasses>0,1,2</usbClasses>
<sdio>1</sdio>
<bluetooth>1</bluetooth>
<wifi>1</wifi>
<bluetoothProfile>0,1</bluetoothProfile>
<joinAndDirectTransferPolicy>0</joinAndDirectTransferPolicy>
<videoCapability>1</videoCapability>
<webAccess>0</webAccess>
<eapAuthentication>2</eapAuthentication>
<webProtocol>0</webProtocol>
</enterpriseConfig>
<advertiseG722Codec></advertiseG722Codec>
<userLocale>
<name>Russian_Federation</name>
<uid></uid>
<langCode>ru_RU</langCode>
<version></version>
<winCharSet>utf-8</winCharSet>
</userLocale>
<networkLocale>Russian_Federation</networkLocale>
<networkLocaleInfo>
<name>Russian_Federation</name>
<uid></uid>
<version></version>
</networkLocaleInfo>
<deviceSecurityMode>1</deviceSecurityMode>
<idleTimeout>0</idleTimeout>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<idleURL></idleURL>
<informationURL></informationURL>
<messagesNumber></messagesNumber>
<messagesURL></messagesURL>
<proxyServerURL></proxyServerURL>
<servicesURL></servicesURL>
<dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>2</transportLayerProtocol>
<dndCallAlert>5</dndCallAlert>
<phonePersonalization>1</phonePersonalization>
<rollover>0</rollover>
<singleButtonBarge>0</singleButtonBarge>
<joinAcrossLines>1</joinAcrossLines>
<autoCallPickupEnable>false</autoCallPickupEnable>
<blfAudibleAlertSettingOfIdleStation>0</blfAudibleAlertSettingOfIdleStation>
<blfAudibleAlertSettingOfBusyStation>0</blfAudibleAlertSettingOfBusyStation>
<capfAuthMode>0</capfAuthMode>
<capfList>
<capf>
<phonePort>3804</phonePort>
</capf>
</capfList>
<certHash></certHash>
<encrConfig>false</encrConfig>
<sipProfile>
<sipProxies>
<backupProxy>10.4.2.100</backupProxy>
<backupProxyPort>5060</backupProxyPort>
<emergencyProxy>10.4.2.100</emergencyProxy>
<emergencyProxyPort>5060</emergencyProxyPort>
<outboundProxy></outboundProxy>
<outboundProxyPort></outboundProxyPort>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<callForwardURI>x-cisco-serviceuri-cfwdall</callForwardURI>
<callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
<callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
<callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
<meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
<abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
<rfc2543Hold>false</rfc2543Hold>
<callHoldRingback>2</callHoldRingback>
<localCfwdEnable>true</localCfwdEnable>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>0</dndControl>
<remoteCcEnable>true</remoteCcEnable>
<retainForwardInformation>true</retainForwardInformation>
</sipCallFeatures>
<sipStack>
<sipInviteRetx>6</sipInviteRetx>
<sipRetx>10</sipRetx>
<timerInviteExpires>180</timerInviteExpires>
<timerRegisterExpires>3600</timerRegisterExpires>
<timerRegisterDelta>5</timerRegisterDelta>
<timerKeepAliveExpires>120</timerKeepAliveExpires>
<timerSubscribeExpires>120</timerSubscribeExpires>
<timerSubscribeDelta>5</timerSubscribeDelta>
<timerT1>500</timerT1>
<timerT2>4000</timerT2>
<maxRedirects>70</maxRedirects>
<remotePartyID>false</remotePartyID>
<userInfo>None</userInfo>
</sipStack>
<autoAnswerTimer>0</autoAnswerTimer>
<autoAnswerAltBehavior>false</autoAnswerAltBehavior>
<autoAnswerOverride>true</autoAnswerOverride>
<transferOnhookEnabled>false</transferOnhookEnabled>
<enableVad>false</enableVad>
<preferredCodec>none</preferredCodec>
<dtmfAvtPayload>101</dtmfAvtPayload>
<dtmfDbLevel>3</dtmfDbLevel>
<dtmfOutofBand>avt</dtmfOutofBand>
<alwaysUsePrimeLine>true</alwaysUsePrimeLine>
<alwaysUsePrimeLineVoiceMail>true</alwaysUsePrimeLineVoiceMail>
<kpml>3</kpml>
<natEnabled>false</natEnabled>
<natAddress>10.4.2.100</natAddress>
<stutterMsgWaiting>2</stutterMsgWaiting>
<callStats>false</callStats>
<silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
<disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
<startMediaPort>10000</startMediaPort>
<stopMediaPort>20000</stopMediaPort>
<voipControlPort>5060</voipControlPort>
<dscpForAudio>184</dscpForAudio>
<dscpVideo>136</dscpVideo>
<dscpForTelepresence>128</dscpForTelepresence>
<ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
<softKeyFile>softkey.xml</softKeyFile>
<dialTemplate>dialplan.xml</dialTemplate>
<phoneLabel></phoneLabel>
<sipLines>
<line button="1" lineIndex="1">
<featureID>9</featureID>
<featureLabel>3003</featureLabel>
<name>3003</name>
<displayName>3003</displayName>
<contact>3003</contact>
<proxy>10.4.2.100</proxy>
<port>5060</port>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>3</callWaiting>
<authName>3003</authName>
<authPassword>password</authPassword>
<sharedLine>false</sharedLine>
<messageWaitingLampPolicy>3</messageWaitingLampPolicy>
<messageWaitingAMWI>1</messageWaitingAMWI>
<messagesNumber>*97</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>false</callerNumber>
<redirectedNumber>false</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
<maxNumCalls>4</maxNumCalls>
<busyTrigger>2</busyTrigger>
</line>
<line button="2" lineIndex="1">
<featureID>9</featureID>
<featureLabel>3003</featureLabel>
<name>3003</name>
<displayName>3003</displayName>
<contact>3003</contact>
<proxy>10.4.2.100</proxy>
<port>5060</port>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>3</callWaiting>
<authName>3003</authName>
<authPassword>password</authPassword>
<sharedLine>false</sharedLine>
<messageWaitingLampPolicy>3</messageWaitingLampPolicy>
<messageWaitingAMWI>1</messageWaitingAMWI>
<messagesNumber>*97</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>false</callerNumber>
<redirectedNumber>false</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
<maxNumCalls>4</maxNumCalls>
<busyTrigger>2</busyTrigger>
</line>
</sipLines>
</sipProfile>
<phoneServices>
<provisioning>0</provisioning>
</phoneServices>
</device>
Re: Не работает BLF на Cisco CP-9971 и Cisco CP-7975G
Добавлено: 27 янв 2014, 19:19
ded
Конфиг неправильный. Две одинаковие линейные кнопки 3003 - первая линия и вторая.
Ни одной кнопки с <featureID>21</featureID>
Проверять чужие конфиги на предмет ошибок - тяжёлый неблагодарный труд.
Проверяйте сами, читайте логи в телефоне, на ошибки телефон реагирует недвусмысленно. Смотрите sip debug пакетов hints.
Re: Не работает BLF на Cisco CP-9971 и Cisco CP-7975G
Добавлено: 28 янв 2014, 09:22
Sansey
Конфиг правильный, провижингом сгенерировал без кнопки BLF. И да, две кнопки одинаковых линий работают.
Re: Не работает BLF на Cisco CP-9971 и Cisco CP-7975G
Добавлено: 28 янв 2014, 09:24
Sansey
С кнопкой BLF
Код: Выделить всё
<?xml version="1.0" encoding="UTF-8"?>
<device>
<deviceProtocol>SIP</deviceProtocol>
<sshUserId>admin</sshUserId>
<sshPassword>cisco</sshPassword>
<devicePool>
<dateTimeSetting>
<dateTemplate>D.M.Y</dateTemplate>
<timeTemplate>HH:MM</timeTemplate>
<timeZone>Caucasus Standard/Daylight Time</timeZone>
<ntps>
<ntp>
<name>10.4.2.100</name>
<ntpMode>Unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
</ports>
<processNodeName>10.4.2.100</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<commonProfile>
<phonePassword></phonePassword>
<backgroundImageAccess>true</backgroundImageAccess>
<callLogBlfEnabled>3</callLogBlfEnabled>
</commonProfile>
<loadInformation>sip9971.9-4-1-9</loadInformation>
<featurePolicyFile>DefaultFP.xml</featurePolicyFile>
<vendorConfig>
<disableSpeaker>false</disableSpeaker>
<disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
<pcPort>0</pcPort>
<settingsAccess>1</settingsAccess>
<garp>0</garp>
<voiceVlanAccess>0</voiceVlanAccess>
<ciscoCamera>1</ciscoCamera>
<videoCapability>1</videoCapability>
<usbClasses>0,1,2</usbClasses>
<sdio>1</sdio>
<wifi>0</wifi>
<bluetoothProfile>0,1</bluetoothProfile>
<powerNegotiation>0</powerNegotiation>
<autoSelectLineEnable>0</autoSelectLineEnable>
<webAccess>0</webAccess>
<sshAccess>0</sshAccess>
<g722CodecSupport></g722CodecSupport>
<daysDisplayNotActive>1,2,3,4,5,6,7</daysDisplayNotActive>
<displayOnTime>08:30</displayOnTime>
<displayOnDuration>09:30</displayOnDuration>
<displayIdleTimeout>01:00</displayIdleTimeout>
<displayOnWhenIncomingCall>1</displayOnWhenIncomingCall>
<spanToPCPort>1</spanToPCPort>
<loggingDisplay>1</loggingDisplay>
<loadServer></loadServer>
</vendorConfig>
<commonConfig>
<usb1>1</usb1>
<usb2>1</usb2>
<ciscoCamera>1</ciscoCamera>
<usbClasses>0,1,2</usbClasses>
<sdio>1</sdio>
<bluetooth>1</bluetooth>
<wifi>1</wifi>
<bluetoothProfile>0,1</bluetoothProfile>
<joinAndDirectTransferPolicy>0</joinAndDirectTransferPolicy>
</commonConfig>
<enterpriseConfig>
<usb1>1</usb1>
<usb2>1</usb2>
<ciscoCamera>1</ciscoCamera>
<usbClasses>0,1,2</usbClasses>
<sdio>1</sdio>
<bluetooth>1</bluetooth>
<wifi>1</wifi>
<bluetoothProfile>0,1</bluetoothProfile>
<joinAndDirectTransferPolicy>0</joinAndDirectTransferPolicy>
<videoCapability>1</videoCapability>
<webAccess>0</webAccess>
<eapAuthentication>2</eapAuthentication>
<webProtocol>0</webProtocol>
</enterpriseConfig>
<advertiseG722Codec></advertiseG722Codec>
<userLocale>
<name>Russian_Federation</name>
<uid></uid>
<langCode>ru_RU</langCode>
<version></version>
<winCharSet>utf-8</winCharSet>
</userLocale>
<networkLocale>Russian_Federation</networkLocale>
<networkLocaleInfo>
<name>Russian_Federation</name>
<uid></uid>
<version></version>
</networkLocaleInfo>
<deviceSecurityMode>1</deviceSecurityMode>
<idleTimeout>0</idleTimeout>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<idleURL></idleURL>
<informationURL></informationURL>
<messagesNumber></messagesNumber>
<messagesURL></messagesURL>
<proxyServerURL></proxyServerURL>
<servicesURL></servicesURL>
<dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>2</transportLayerProtocol>
<dndCallAlert>5</dndCallAlert>
<phonePersonalization>1</phonePersonalization>
<rollover>0</rollover>
<singleButtonBarge>0</singleButtonBarge>
<joinAcrossLines>1</joinAcrossLines>
<autoCallPickupEnable>false</autoCallPickupEnable>
<blfAudibleAlertSettingOfIdleStation>0</blfAudibleAlertSettingOfIdleStation>
<blfAudibleAlertSettingOfBusyStation>0</blfAudibleAlertSettingOfBusyStation>
<capfAuthMode>0</capfAuthMode>
<capfList>
<capf>
<phonePort>3804</phonePort>
</capf>
</capfList>
<certHash></certHash>
<encrConfig>false</encrConfig>
<sipProfile>
<sipProxies>
<backupProxy>10.4.2.100</backupProxy>
<backupProxyPort>5060</backupProxyPort>
<emergencyProxy>10.4.2.100</emergencyProxy>
<emergencyProxyPort>5060</emergencyProxyPort>
<outboundProxy></outboundProxy>
<outboundProxyPort></outboundProxyPort>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<callForwardURI>x-cisco-serviceuri-cfwdall</callForwardURI>
<callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
<callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
<callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
<meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
<abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
<rfc2543Hold>false</rfc2543Hold>
<callHoldRingback>2</callHoldRingback>
<localCfwdEnable>true</localCfwdEnable>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>0</dndControl>
<remoteCcEnable>true</remoteCcEnable>
<retainForwardInformation>true</retainForwardInformation>
</sipCallFeatures>
<sipStack>
<sipInviteRetx>6</sipInviteRetx>
<sipRetx>10</sipRetx>
<timerInviteExpires>180</timerInviteExpires>
<timerRegisterExpires>3600</timerRegisterExpires>
<timerRegisterDelta>5</timerRegisterDelta>
<timerKeepAliveExpires>120</timerKeepAliveExpires>
<timerSubscribeExpires>120</timerSubscribeExpires>
<timerSubscribeDelta>5</timerSubscribeDelta>
<timerT1>500</timerT1>
<timerT2>4000</timerT2>
<maxRedirects>70</maxRedirects>
<remotePartyID>false</remotePartyID>
<userInfo>None</userInfo>
</sipStack>
<autoAnswerTimer>0</autoAnswerTimer>
<autoAnswerAltBehavior>false</autoAnswerAltBehavior>
<autoAnswerOverride>true</autoAnswerOverride>
<transferOnhookEnabled>false</transferOnhookEnabled>
<enableVad>false</enableVad>
<preferredCodec>none</preferredCodec>
<dtmfAvtPayload>101</dtmfAvtPayload>
<dtmfDbLevel>3</dtmfDbLevel>
<dtmfOutofBand>avt</dtmfOutofBand>
<alwaysUsePrimeLine>true</alwaysUsePrimeLine>
<alwaysUsePrimeLineVoiceMail>true</alwaysUsePrimeLineVoiceMail>
<kpml>3</kpml>
<natEnabled>false</natEnabled>
<natAddress>10.4.2.100</natAddress>
<stutterMsgWaiting>2</stutterMsgWaiting>
<callStats>false</callStats>
<silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
<disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
<startMediaPort>10000</startMediaPort>
<stopMediaPort>20000</stopMediaPort>
<voipControlPort>5060</voipControlPort>
<dscpForAudio>184</dscpForAudio>
<dscpVideo>136</dscpVideo>
<dscpForTelepresence>128</dscpForTelepresence>
<ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
<softKeyFile>softkey.xml</softKeyFile>
<dialTemplate>dialplan.xml</dialTemplate>
<phoneLabel></phoneLabel>
<sipLines>
<line button="1" lineIndex="1">
<featureID>9</featureID>
<featureLabel>3003</featureLabel>
<name>3003</name>
<displayName>3003</displayName>
<contact>3003</contact>
<proxy>10.4.2.100</proxy>
<port>5060</port>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>3</callWaiting>
<authName>3003</authName>
<authPassword>password</authPassword>
<sharedLine>false</sharedLine>
<messageWaitingLampPolicy>3</messageWaitingLampPolicy>
<messageWaitingAMWI>1</messageWaitingAMWI>
<messagesNumber>*97</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>false</callerNumber>
<redirectedNumber>false</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
<maxNumCalls>4</maxNumCalls>
<busyTrigger>2</busyTrigger>
</line>
<line button="2" lineIndex="1">
<featureID>9</featureID>
<featureLabel>3003</featureLabel>
<name>3003</name>
<displayName>3003</displayName>
<contact>3003</contact>
<proxy>10.4.2.100</proxy>
<port>5060</port>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>3</callWaiting>
<authName>3003</authName>
<authPassword>password</authPassword>
<sharedLine>false</sharedLine>
<messageWaitingLampPolicy>3</messageWaitingLampPolicy>
<messageWaitingAMWI>1</messageWaitingAMWI>
<messagesNumber>*97</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>false</callerNumber>
<redirectedNumber>false</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
<maxNumCalls>4</maxNumCalls>
<busyTrigger>2</busyTrigger>
</line>
<line button="3">
<featureID>21</featureID>
<featureLabel>3000</featureLabel>
<speedDialNumber>3000</speedDialNumber>
<featureOptionMask>1</featureOptionMask>
</line>
</sipLines>
</sipProfile>
<phoneServices>
<provisioning>0</provisioning>
</phoneServices>
</device>
Re: Не работает BLF на Cisco CP-9971 и Cisco CP-7975G
Добавлено: 28 янв 2014, 12:12
ded
Можно и 10 кнопок одинаковых, работать будет. Только объясните - зачем?
P.S. Нет возможности проверить правильность конфига.