asterisk.ru

Дано: "Elastix 2.4.0 32bit" включен в TDM PBX потоками Е1 платой c аппаратным эхоподавлением. Обе PBX настроены и работают расчудесно совместно круглосуточно. Вчера днём общался с одного своего телефона с TDM PBX с другим абонентом этой же TDM PBX через "Elastix" (участвовал в конференции). И обнаружил, что в эфире стоит какой-то слышимый треск и шум, а порою даже слышно эхо ! Обратил свой взор на настройки шумоподавления Hardware Detector -> Configuration of Span, и обнаружил напротив каждой СЛ значение "none" !!! Дорогое эхоподавление попросту отключено !! Сел. Дотошно на каждой СЛ включил. Сохранил. Более эха не было. До сегодняшнего утра. Утром просто загляную на те же самые настройки потоков - опять "none" !!! Шайтан !! Опять сохранил. Опять эхо исчезло. Радоваться бы. Но вспомнил, что где-то неделю назад видел своими очами точно такую же проблему и точно так же с нею боролся !.. Вопрос - почему такое происходит ? Digium Диджиумовский (родной, из Американии). Что сделать, чтобы отключение аппаратного эхоподавления более не происходило !?
Пока не опубликовалось, добавлю: Сейчас прописал по входящей связи возможность звонка в конференцию из TDM по DAHDI на Elastix ещё одного абонента с уникальным А-номером, на всякий случай заглянул в обсуждаемые настройки - опять "none" !!!! Что делать ?..

гадаем на кофейной гуще

смотрим логи, не было ли релоад служб apache, dahdi, asterisk

Хороший вопрос. Сейчас сделал эксперимент. Эластик работает. Зашёл в gui настроек потоков, опять прописал везде где нашёл OSLEC в каждой СЛ. Затем вышел из этой вкладки, зашёл во вкладку Reports, затем во вкладку System, затем опять в Hardwsre Detector -> Config. of Span #1 - и что бы Вы думали - "none" !!!!!!! Лезу в логи Астериска и вот они, вполне безобидные, никаких там релоудов:

... выходит не в релоудах дело-то ... Тогда в чём ?..

Повторил только что проделанную операцию:
All trunks -> OSLEC.
-> Reports
-> System -> HardwareDetector -> see "none" for all trunks !!!!!!!
-> drink Vodka ?

тогда делаем логичный вывод

то что в вебке - не сохраняется, значит надо прописать ручками в файл настройки dahdi

Дык начинающий я - самому не разобраться. Вот захожу я через web-interface в PBX -> Tools -> файл dahdi-channels.conf. Там - следующие настройки:
; Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63

; Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
group=0,12
... и т.д. остальные Span'ы по образу и поодбию 1го ...

А как правильно прописать постоянное включение аппаратного эхоподавления-то ?

Ещё смущает фраза в самом верху этого файла:
; Autogenerated by /usr/sbin/dahdi_genconf on Tue Dec 3 11:38:58 2013
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

cat system.conf

# Autogenerated by /usr/sbin/dahdi_genconf on Mon May 20 07:37:48 2013
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS/CRC4 ClockSource
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

# Global data

loadzone = ru
defaultzone = ru

вот эта надпись mg2 говорит о включенном подавлении,
если собрано с поддержкой oslec, тогда так

echocanceller=oslec,1-15,17-31

to awsswa:
Спасибо. Что-то не нашёл я такого файлика в своей машинке. Есть отдалённо похожий по содержанию файлик /etc/asterisk/chan_dahdi.conf.elastixsave:

[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1

;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3


immediate=no

#include dahdi-channels.conf
#include chan_dahdi_additional.conf


Но он ли мне нужен - я пока не пойму. Потому что де-факто пока настроил каналы на включение OSLEC и пролистал 3 вкладки в Elastix, у меня из 4х потоков эходподавление почему-то осталось лишь на 3х !!


[root@elastix ~]# dahdi_cfg -vv
DAHDI Tools Version - 2.6.1

DAHDI Version: 2.6.1
Echo Canceller(s): HWEC
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 3: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 4: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 08)
Channel 09: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 11)
Channel 12: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 12)
Channel 13: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 13)
Channel 14: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 14)
Channel 15: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 15)
Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
Channel 17: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 17)
Channel 18: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 18)
Channel 19: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 19)
Channel 20: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 20)
Channel 21: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 21)
Channel 22: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 22)
Channel 23: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 23)
Channel 24: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 24)
Channel 25: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 25)
Channel 26: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 26)
Channel 27: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 27)
Channel 28: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 28)
Channel 29: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 29)
Channel 30: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 30)
Channel 31: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 31)
Channel 32: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 32)
Channel 33: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 33)
Channel 34: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 34)
Channel 35: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 35)
Channel 36: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 36)
Channel 37: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 37)
Channel 38: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 38)
Channel 39: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 39)
Channel 40: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 40)
Channel 41: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 41)
Channel 42: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 42)
Channel 43: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 43)
Channel 44: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 44)
Channel 45: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 45)
Channel 46: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 46)
Channel 47: D-channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 47)
Channel 48: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 48)
Channel 49: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 49)
Channel 50: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 50)
Channel 51: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 51)
Channel 52: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 52)
Channel 53: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 53)
Channel 54: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 54)
Channel 55: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 55)
Channel 56: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 56)
Channel 57: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 57)
Channel 58: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 58)
Channel 59: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 59)
Channel 60: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 60)
Channel 61: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 61)
Channel 62: Clear channel (Default) (Echo Canceler: vpmoct128 - ina) (Slaves: 62)
Channel 63: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 63)
Channel 64: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 64)
Channel 65: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 65)
Channel 66: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 66)
Channel 67: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 67)
Channel 68: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 68)
Channel 69: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 69)
Channel 70: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 70)
Channel 71: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 71)
Channel 72: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 72)
Channel 73: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 73)
Channel 74: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 74)
Channel 75: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 75)
Channel 76: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 76)
Channel 77: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 77)
Channel 78: D-channel (Default) (Echo Canceler: none) (Slaves: 78)
Channel 79: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 79)
Channel 80: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 80)
Channel 81: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 81)
Channel 82: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 82)
Channel 83: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 83)
Channel 84: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 84)
Channel 85: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 85)
Channel 86: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 86)
Channel 87: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 87)
Channel 88: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 88)
Channel 89: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 89)
Channel 90: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 90)
Channel 91: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 91)
Channel 92: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 92)
Channel 93: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 93)
Channel 94: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 94)
Channel 95: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 95)
Channel 96: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 96)
Channel 97: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 97)
Channel 98: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 98)
Channel 99: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 99)
Channel 100: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 100)
Channel 101: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 101)
Channel 102: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 102)
Channel 103: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 103)
Channel 104: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 104)
Channel 105: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 105)
Channel 106: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 106)
Channel 107: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 107)
Channel 108: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 108)
Channel 109: D-channel (Default) (Echo Canceler: none) (Slaves: 109)
Channel 110: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 110)
Channel 111: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 111)
Channel 112: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 112)
Channel 113: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 113)
Channel 114: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 114)
Channel 115: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 115)
Channel 116: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 116)
Channel 117: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 117)
Channel 118: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 118)
Channel 119: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 119)
Channel 120: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 120)
Channel 121: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 121)
Channel 122: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 122)
Channel 123: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 123)
Channel 124: Clear channel (Default) (Echo Canceler: oslec) (Slaves: 124)

124 channels to configure.

Setting echocan for channel 1 to oslec
Setting echocan for channel 2 to oslec
Setting echocan for channel 3 to oslec
Setting echocan for channel 4 to oslec
Setting echocan for channel 5 to oslec
Setting echocan for channel 6 to oslec
Setting echocan for channel 7 to oslec
Setting echocan for channel 8 to oslec
Setting echocan for channel 9 to oslec
Setting echocan for channel 10 to oslec
Setting echocan for channel 11 to oslec
Setting echocan for channel 12 to oslec
Setting echocan for channel 13 to oslec
Setting echocan for channel 14 to oslec
Setting echocan for channel 15 to oslec
Setting echocan for channel 16 to none
Setting echocan for channel 17 to oslec
Setting echocan for channel 18 to oslec
Setting echocan for channel 19 to oslec
Setting echocan for channel 20 to oslec
Setting echocan for channel 21 to oslec
Setting echocan for channel 22 to oslec
Setting echocan for channel 23 to oslec
Setting echocan for channel 24 to oslec
Setting echocan for channel 25 to oslec
Setting echocan for channel 26 to oslec
Setting echocan for channel 27 to oslec
Setting echocan for channel 28 to oslec
Setting echocan for channel 29 to oslec
Setting echocan for channel 30 to oslec
Setting echocan for channel 31 to oslec
Setting echocan for channel 32 to vpmoct128 - ina
Setting echocan for channel 33 to vpmoct128 - ina
Setting echocan for channel 34 to vpmoct128 - ina
Setting echocan for channel 35 to vpmoct128 - ina
Setting echocan for channel 36 to vpmoct128 - ina
Setting echocan for channel 37 to vpmoct128 - ina
Setting echocan for channel 38 to vpmoct128 - ina
Setting echocan for channel 39 to vpmoct128 - ina
Setting echocan for channel 40 to vpmoct128 - ina
Setting echocan for channel 41 to vpmoct128 - ina
Setting echocan for channel 42 to vpmoct128 - ina
Setting echocan for channel 43 to vpmoct128 - ina
Setting echocan for channel 44 to vpmoct128 - ina
Setting echocan for channel 45 to vpmoct128 - ina
Setting echocan for channel 46 to vpmoct128 - ina
Setting echocan for channel 47 to vpmoct128 - ina
Setting echocan for channel 48 to vpmoct128 - ina
Setting echocan for channel 49 to vpmoct128 - ina
Setting echocan for channel 50 to vpmoct128 - ina
Setting echocan for channel 51 to vpmoct128 - ina
Setting echocan for channel 52 to vpmoct128 - ina
Setting echocan for channel 53 to vpmoct128 - ina
Setting echocan for channel 54 to vpmoct128 - ina
Setting echocan for channel 55 to vpmoct128 - ina
Setting echocan for channel 56 to vpmoct128 - ina
Setting echocan for channel 57 to vpmoct128 - ina
Setting echocan for channel 58 to vpmoct128 - ina
Setting echocan for channel 59 to vpmoct128 - ina
Setting echocan for channel 60 to vpmoct128 - ina
Setting echocan for channel 61 to vpmoct128 - ina
Setting echocan for channel 62 to vpmoct128 - ina
Setting echocan for channel 63 to oslec
Setting echocan for channel 64 to oslec
Setting echocan for channel 65 to oslec
Setting echocan for channel 66 to oslec
Setting echocan for channel 67 to oslec
Setting echocan for channel 68 to oslec
Setting echocan for channel 69 to oslec
Setting echocan for channel 70 to oslec
Setting echocan for channel 71 to oslec
Setting echocan for channel 72 to oslec
Setting echocan for channel 73 to oslec
Setting echocan for channel 74 to oslec
Setting echocan for channel 75 to oslec
Setting echocan for channel 76 to oslec
Setting echocan for channel 77 to oslec
Setting echocan for channel 78 to none
Setting echocan for channel 79 to oslec
Setting echocan for channel 80 to oslec
Setting echocan for channel 81 to oslec
Setting echocan for channel 82 to oslec
Setting echocan for channel 83 to oslec
Setting echocan for channel 84 to oslec
Setting echocan for channel 85 to oslec
Setting echocan for channel 86 to oslec
Setting echocan for channel 87 to oslec
Setting echocan for channel 88 to oslec
Setting echocan for channel 89 to oslec
Setting echocan for channel 90 to oslec
Setting echocan for channel 91 to oslec
Setting echocan for channel 92 to oslec
Setting echocan for channel 93 to oslec
Setting echocan for channel 94 to oslec
Setting echocan for channel 95 to oslec
Setting echocan for channel 96 to oslec
Setting echocan for channel 97 to oslec
Setting echocan for channel 98 to oslec
Setting echocan for channel 99 to oslec
Setting echocan for channel 100 to oslec
Setting echocan for channel 101 to oslec
Setting echocan for channel 102 to oslec
Setting echocan for channel 103 to oslec
Setting echocan for channel 104 to oslec
Setting echocan for channel 105 to oslec
Setting echocan for channel 106 to oslec
Setting echocan for channel 107 to oslec
Setting echocan for channel 108 to oslec
Setting echocan for channel 109 to none
Setting echocan for channel 110 to oslec
Setting echocan for channel 111 to oslec
Setting echocan for channel 112 to oslec
Setting echocan for channel 113 to oslec
Setting echocan for channel 114 to oslec
Setting echocan for channel 115 to oslec
Setting echocan for channel 116 to oslec
Setting echocan for channel 117 to oslec
Setting echocan for channel 118 to oslec
Setting echocan for channel 119 to oslec
Setting echocan for channel 120 to oslec
Setting echocan for channel 121 to oslec
Setting echocan for channel 122 to oslec
Setting echocan for channel 123 to oslec
Setting echocan for channel 124 to oslec
[root@elastix ~]#

Что наверное не есть совсем хорошо. Вот ежели бы все 120 channels весело писали бы "Oslec" - я был бы счастлив. А то через GUI попытался прописать эхоподавление на 2м потоке Е1 - на 1м эхоподавление отвалилось ... Шайтан какой-то ... Куда б прописать железно "Oslec", чтоб он всегда был включен у всех 4х потоков ?..
Заранее благодарен за вар-ты ответа.
... Извините, а сразу уж бы и ликбез - а чем отличается "Oslec" от "Mg2" ? И мне-то который нужнее ?

вы хоть гуглом то пользуетесь ?
/etc/dahdi/system.conf